| |
Unlike most other valves of this type on the market, the GR valve is fabricated from heavy duty plate and is fitted with a unique flap sealing system.
The vane is machined with a recess that takes our custom designed spring loaded, self-adjusting seals and even the back of the shaft is sealed in this way. The top seal uses a heavy duty polyurethane seal which in each position is proected by deflectors.
Designed for use with abrasive products, the vane can be hardened or fitted with wear plates in ABRO or even ceramics. |
|
Shown is the Y type diverter with legs equal about the centreline- if you need to divert one leg off to the side while the main leg continues downwards, this is also a standard configuration.
Standard options include:
- Heavy duty fabricated body
- Self-adjusting spring loaded seals
- Y type, ST or 3 way
- Any body materials that can be fabricated
- Food grade and polished finishes
- ATEX certification
- Non-standard and rectangular sizes
- Explosion containment
- Inspection panels
|
